Heated Hoses and Spray Guns
Why Matching Matters for Spray Foam and Polyurethane Jobs
Properly matched heated hoses and spray guns can mean the difference between smooth efficiency and frustrating downtime.
- Heated hoses – Keep material at the right temperature from the proportioner to the gun for consistent viscosity and mix ratios.
- Spray guns – The right purge system delivers clean cycles and quick changeovers. That means less time fixing clogs and more time spraying.
Heated Hoses
Maintaining the right temperature is critical for spray foam insulation and polyurea coating applications. To ensure reliable performance, ICAFe PCR supplies internally and externally heated hoses by Graco and Polyurethane Machinery Corporation (PMC).
Heated hoses keep material at the correct temperature from the proportioner to the spray gun, maintaining consistent viscosity and proper chemical reaction. Properly selected and maintained hoses prevent clogs, reduce waste, and improve spray pattern accuracy.
Internal Heated Hoses
Internally heated hoses use built-in heating elements beneath the fluid lining to heat the core directly. This speeds up heat-up times and reduces external components, compared to external heating designs.
Choose internal heated hoses for jobs that need streamlined setup and rapid temperature response.
Graco Xcelerator internal heated hoses typically heat up 40 percent faster, offer 40 percent more flexibility, and have a 35 percent smaller diameter than traditional externally heated hoses.
External Heated Hoses
Externally heated hoses use heating elements wrapped around the outside of the fluid tube, insulated under a protective sleeve. Choose this standard configuration for precise temperature control and rugged durability.
Graco Externally Heated Hoses
Graco Reactor Whip Hoses
PMC MA‑00040A High Pressure Whip Hose
PMC MA-00039A-TC High Pressure Hose
PMC MA-00039A High Pressure Hose
PMC 200008 Heated Hose with TSU & Scuff
PMC 200007 High Pressure Hose with Scuff Guard
PMC MA-00014A Low Pressure Hose
PMC 200006 Heated Hose with TSU & Scuff
PMC 200005 Low Pressure Hose with Scuff
Spray Foam Insulation and Polyurethane Guns
Pairing the right hose with a compatible spray gun ensures reliable purging, faster changeovers, and minimal downtime. The result: high productivity, excellent finish quality, and long equipment life.
Spray guns from Graco and Polyurethane Machinery Corporation (PMC) work reliably with professional contractor rigs and turnkey equipment setups by ICAFe PCR.
Fusion FX
The Smallest, Lightest, Best-Balanced Gun for Polyurea and Spray Foam
Created with the contractor in mind, breakthrough spray gun technology delivers high quality results.
Air-Purge Spray Guns
Air purge guns use compressed air to clear the mix chamber. On trigger release, compressed air blows out residual material from the mix chamber for simple, fast, and low maintenance.
Graco Fusion AP Guns
Graco Fusion PC Guns
Graco Probler P2 Guns
Graco Probler P2 Elite Guns
PMC Xtreme Spray Gun
PMC AP-2 Spray / Pour Gun
Liquid-Purge Spray Guns
Liquid purge guns inject a flush fluid into the chamber, protecting against chemical build-up between trigger pulls. When the trigger is released, a dedicated fluid cleans the chamber, reducing the risk of chemical residue curing between shots.
Graco Fusion CS Guns
Graco Fusion FX Guns
Mechanical Purge Spray Guns
Mechanical purge guns use a rod mechanism to physically expel residual material, eliminating the need for solvents or compressed air purge.
Graco Gusmer GX-7 Guns
PMC PX-7 Mechanical Purge Gun
Get a Quote
Find the right heated hose and spray gun setup for your rig or in-plant application.
Contact us, and an ICAFe PCR representative will work with you to understand your spray foam, polyurea, or other HPCF needs, then recommend the best solution.